Little Giant Interchangeable Die System

Change dies quickly, with very little effort.

  1. Decide which die you want to replace; upper, lower or both.
  2. Install the BASE of the Die System, using a standard die key.
  3. Complete the Die System by bolting on a DIE TOP (pipctured on the next page) onto the Base, using countersunk allen head bolts.
Upper Die Base
(installed in ram)
for 25 LB . . . . . . . . . . . . . . . . . . . $118
for 50 LB . . . . . . . . . . . . . . . . . . . $154
Lower Die Base
(installed in die block)
for 25 LB . . . . . . . . . . . . . . . . . . . $118
for 50 LB . . . . . . . . . . . . . . . . . . . $154
  • Bases and Die tops are made of 4140, professionally heat-treated to Rockwell 46-48
  • Combined height of Base and Top is equal to the height of a standard new die.
  • Available for 50 LB Little Giants only:  Combination Die Top, work surface 4"x2.5".  Sold in pairs (to be used for top and bottom dies) $342 per set.